Ford 150 – Ultimate Ride

Front Runner Series Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit

admin — Fri, 04 Sep 2026 06:38:07 +0000

This low-profile flat deck Slimsport rack has a load-carrying area of 1677mm (66″) x 1417mm(55.8″).
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport Side Mount Accessory Bracket / Small (sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim makes the rack ultra-quiet and allows full operation of the moonroof
Need a lightbar? The optional Ford F-150 Crew Cab (2021-Current) Slimsport Rack 40″ Light Bar Wind Fairing (sold separately) has a 40″ cutout to allow the use of 40″ LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Drilling required for fitment (all hardware included).
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Note: Only compatible with rear factory antenna or when no front antenna is fitted.
Note: Suitable for F-150 Lightning.

All Dometic Front Runner Series racks are backed by a 5‑year warranty*

Runva 13 Expedition winch 12V, 13,000lbs

admin — Wed, 02 Sep 2026 19:53:57 +0000

Product Description

GET UNSTUCK,
GET GOING!

Dominate the Terrain!

The RUNVA 13EXPEDITION is not just a winch; it’s your ultimate companion for conquering the most challenging off-road terrains. Engineered with an impressive line pull capacity of 13,000 pounds (5,897 kg) and a rapid 228:1 gear ratio, this winch is designed for peak performance in even the most demanding environments. Whether you’re tackling steep inclines, navigating through mud, or facing unforeseen challenges, the 13EXPEDITION provides the strength and reliability you need to tackle any situation. The 13EXPEDITION is designed for versatility, compatible with most bull bars on the market. This seamless integration ensures it enhances your off-road setup without compromising valuable space or adding excessive weight. The robust design of the 13EXPEDITION guarantees that it stands up to the rigors of outdoor use, providing confidence that you are equipped for any recovery operation.

11,000LB Line Pull Capacity
IP67 Ingress Protection
Fast 228:1 Gear Ratio
Ratchet Mechanical Brake System
Wireless Rechargeable Remote

RATED LINE PULL13,000LB (5,897KG)

Runva 13XP-12VD Premium Winch

admin — Wed, 02 Sep 2026 19:53:57 +0000

Product Description

Ideal for most heavy duty 4X4 applications, this model features the newly designed gearbox with integrated ratchet braking system. The ENTIRE winch is IP67 rated. Another fantastic model crafted by Runva.

The winch is supplied with 3 mounting options for the latest style control box:
– Mount it over the winch motor
– Mount it over the drum
– Mount it on a winch bar

Specifications

Rated Line Pull – 13000lb (5897kg)

Motor – Series Wound (12V) 5.6kW/7.6HP – IP67 Rated
Gear Train – Full Steel 3 Stage Planetary
Gear Ratio – 228:1
Brake – Automatic Rachet Load Holding in the gearbox
Dyneema – 11mm x 26.5m
Drum Size – 63mm x 217m
Mounting Bolt Pattern – 254mm x 114.3mm
Overall Dimensions – 602mm x 160mm x 200mm
Remote Control – 3.7m Handheld Remote/Wireless Remote
Battery Leads Included – 2 x 1.8m Heavy Duty Leads
Finish – Black Powder Coat
Net Weight – 31.4kg
Gross Weight – 33.4kg (includes packaging)
Warranty – Limited Lifetime

Shipping calculated at checkout is for Metro Brisbane, Sydney, Melbourne, Adelaide, Hobart, and Perth. If you are out of these areas, contact us for freight quote or we will call you prior to shipping for the extra charge.

Carbon Winch Accessory Kit 12V

admin — Wed, 02 Sep 2026 19:53:49 +0000

The Carbon Winch Accessory Kit 12V is a comprehensive control and hardware upgrade from Carbon Offroad, designed for setting up or replacing essential components on a 12V electric winch.

Versatile Control & Hardware

Built to handle rugged off-road conditions, this kit provides a complete recovery solution with common mounting configurations in mind. Winch control is handled via dual-remote functionality for ultimate recovery flexibility. Use the wired remote when working close to the drum for direct control, or switch to the wireless remote when you need flexibility during positioning and recovery.

To complete the setup, the kit includes a premium multi-fit CNC aluminium fairlead. This versatile component supports both standard and offset rope mounting positions to suit a wide range of bullbars and winch mounts.

Why Choose This Kit?

Protection: 12V sealed winch control box built for the elements.
Power: High-rating 600A solenoid for reliable switching.
Installation: Supplied cables and hardware allow for straightforward installation on compatible winches.
Flexibility: Wireless operation allows for safer vantage points during heavy recoveries.

1 x Sealed control box with integrated 600 amp solenoid
1 x Wired winch remote
1 x Wireless winch remote
1 x Multi-fit CNC aluminium fairlead
1 x Battery and control cables set
1 x Mounting hardware kit
1 x Carbon Offroad keyring

Feature	Specification Metric (Imperial)
System	Complete 12V winch accessory and control kit
Compatibility	Suits most 12V electric winches
Solenoid	600A Integrated / Sealed
Control Type	Dual: Wired and Wireless
Fairlead Material	CNC Aluminium (Multi-fit)

Carbon Winch Accessory Kit 24V

admin — Wed, 02 Sep 2026 19:53:49 +0000

The Carbon Winch Accessory Kit 24V is a comprehensive recovery upgrade designed for high-voltage systems, featuring a 600 amp integrated solenoid and precision CNC aluminium fairlead.

A complete 24V winch accessory and control kit from Carbon Offroad. Includes sealed control box with integrated solenoid, wired and wireless remotes, and a multi-fit CNC aluminium fairlead.

The Carbon Offroad Winch Accessory Kit 24V is designed for setting up or replacing essential winch control components on a 24V electric winch. The kit includes a sealed control box with integrated 600 amp solenoid, built to handle off-road conditions and common mounting configurations. Supplied cables and hardware allow for straightforward installation on most compatible winches.

Winch control is handled via both wired and wireless remotes. Use the wired remote when working close to the drum, or the wireless remote when you need flexibility during positioning and recovery. A multi-fit CNC aluminium fairlead is included, supporting both standard and offset mounting positions to suit a wide range of bullbars and winch mounts.

Fast Facts

System: Complete 24V winch accessory and control kit.
Solenoid: Control box with integrated 600 amp solenoid.
Control: Includes wired and wireless winch remotes.
Fairlead: Multi-fit CNC aluminium fairlead included.
Compatibility: Suits most 24V electric winches.

Winch Accessory Kit Features

Protection: 24V sealed winch control box.
Power: Integrated 600 amp solenoid.
Wired Remote: For direct winch control.
Wireless Remote: For flexible operation.
Premium Fairlead: Multi-fit CNC aluminium fairlead.
Mounting: Supports standard and offset rope mounting.

1 x 24V winch control box with integrated 600 amp solenoid
1 x Wired winch remote
1 x Wireless winch remote
1 x Multi-fit CNC aluminium fairlead
1 x Battery and control cables set
1 x Mounting hardware kit
1 x Carbon Offroad keyring

Feature	Specification Metric (Imperial)
Voltage	24V
Solenoid Rating	600A
Control type	Wired and wireless
Fairlead material	CNC aluminium
Compatibility	Most 24V electric winches

3 reviews Carbon Offroad Air Freespool Clutch Upgrade for 12K & Scout Pro Winches

admin — Wed, 02 Sep 2026 19:53:49 +0000

Carbon Offroad Air Freespool Clutch Upgrade – Replace your manual lever with an air-actuated clutch for Carbon 12K and Scout Pro winches. Effortless engagement/disengagement, faster recoveries, and safer, easier operation in tough off-road conditions.

Carbon Scout Pro 15000lb V3 24V

admin — Wed, 02 Sep 2026 19:53:40 +0000

Extreme Duty Recovery Power

The Carbon Offroad Scout Pro 15K 24V is an extreme duty winch featuring a 7HP motor, a 218:1 gear ratio, and a 6803kg (15000lbs) pulling capacity built for heavy rigs.

The Carbon Offroad Scout Pro 15K 24V is a powerhouse built to bridge the gap between mid-size 4×4 winches and full-blown truck-grade brutes. Featuring a 7HP motor and a 218:1 gear ratio, this winch delivers massive pulling capacity.

Engineered for Heavy Rigs

Running a slide-in camper? Hauling heavy toy haulers through deep sand? Driving a fully loaded RAM 2500, Silverado HD, F-250, or an overland-ready LandCruiser that’s well past a 12K winch’s comfort zone? If your rig needs more muscle without stepping up to a massive 20K truck winch, this is your sweet spot.

From the slick rock climbs of Moab and the boulder-strewn Rubicon Trail to the sandstone ledges of Sand Hollow and the mud bogs of Tassie, the Scout Pro 15K has been tested and proven where it counts. The Scout Pro 15K delivers the strength, durability, and confidence you need to handle the gnarliest recoveries and keep your adventure moving.

Our Extreme Duty Performance Series winches are built for frequent winching in harsh off-road conditions, perfect for rigs that are heavy, fully kitted, or towing off-road.

The Scout Pro series shares the Version 3 winch chassis as our legendary 12K, meaning it fits most larger 4x4s and overland wagons. With its longer 7.0HP motor, check the tech drawings to confirm clearance and fitment on your mount. Most full-size trucks like RAM, F-Series, and Silverado will fit with ease, but any dual cab ute, 70 Series, 200 Series, or similar wagon should be measured up before purchase. Fitment remains the responsibility of the installer or end user.

Features

Rope Thimble: Forged rope thimble, tough enough for the harshest pulls.
Synthetic Rope: 24m (78.7ft) of 11mm (0.4in) high-density pre-stretched premium UHMWPE rope rated at 9000kg (19800lbs) minimum breaking strain.
Hook: Megapro hook, available in 11 different colours to match your rig’s style.
Fairlead: Alloy-forged engraved fairlead, precision machined and built to last.
Controllers: Both wired and wireless controllers included, control your recovery from the driver’s seat or right at the winch.
Safety: Includes isolator switch, adds an extra layer of safety by cutting power to your winch when it’s not in use, preventing accidental operation on the trail.

1 x Carbon Offroad Scout Pro 15K 24V Winch
1 x Forged Rope Thimble
1 x 24m (78.7ft) UHMWPE Synthetic Rope
1 x Megapro Hook
1 x Alloy-Forged Engraved Fairlead
1 x Wired Controller
1 x Wireless Controller
1 x Isolator Switch

Feature	Specification Metric (Imperial)
Rated Line Pull	6803kg (15000lbs)
Motor	7.0HP 24V
Gear Ratio	218:1
Minimum Breaking Strain	9000kg (19800lbs)
Model Number	CW-XD15V3

Carbon 12K – 12000lb Winch V3X with MegaPro Hook – 24V

admin — Wed, 02 Sep 2026 19:53:40 +0000

Lightweight High-Performance 24V Winch

The Carbon 12K V3X is a lightweight, high-performance 12000lb (5450kg) 24V electric winch designed to handle tough off-road conditions.

Overview

Engineered in Australia and refined through real-world use. With a powerful 24 volt 6HP motor, IP68 waterproof rating, and a durable triple planetary gearbox, it’s built for consistent pulling power through mud, sand, and steep terrain. River crossings and mud runs are stress free; this winch features a breathable membrane-style motor breather for heat expansion and contraction.

Supplied as a complete kit with everything you need – wired and wireless remotes (both included), synthetic rope, CNC alloy fairlead, isolator switch, and all mounting hardware it’s ready for installation straight out of the box. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote from the safety and convenience of your driver’s seat.

The Carbon 12K is a proven performer with countless recoveries from the mud bogs of Tassie to the river crossings of the Cape. For peace of mind, it is backed here in Australia by a class-leading 5-year water ingress and electrical warranty, and a lifetime geartrain warranty. It is designed to meet the rugged demands of off-road and utility use in Australian conditions, delivering reliable performance and service life.

Features

Unmatched Pulling Power: Features a massive 12000lb (5450kg) single-line pull driven by a 24V DC 6HP series wound motor.
IP68 Ingress Protection: Rated to withstand dust, dirt, and submersion under freshwater for 30 minutes up to 1.5m depth (not during operation).
Durable Geartrain: Equipped with a 3-stage planetary geartrain and a 218:1 gear ratio for reliable performance.
Complete Installation Kit: Includes an ultra sexy CNC’d anodised alloy signature Carbon fairlead paired with our robust MegaPro hook, plus an isolator switch with extra cabling for safety when not in use.
Upgrade Compatible: Fully compatible with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches.

1 x Carbon 12K Winch V3X (24V)
1 x MegaPro Hook
1 x Synthetic Rope (24m x 10mm diameter)
1 x CNC Billet Alloy Black Anodised Fairlead
1 x Wired Remote Control (12ft/3.7m lead)
1 x Wireless Remote Control
1 x Isolator Switch and Cabling
1 x Mounting Hardware Set

Feature	Specification Metric (Imperial)
Part Number	CW-12KV3XWO-24V
Rated Line Pull	12000lbs single-line
Motor	24V DC 6HP series wound motor
Geartrain	3-Stage Planetary
Gear Ratio	218:1
Clutch (Free Spooling)	Rotating Ring Gear clutch with manual pull and twist handle
Brake	Full load automatic brake (installed in motor housing end plate)
Drum Diameter/Length	63mm x 224mm
Mounting Bolt Pattern	254mm x 114.3mm
Recommended Battery	650 CCA minimum for winching
Winch Dimensions (L x W x H)	538 x 158 x 187mm (21.2″ x 6.2″ x 7.4″)
Packing Dimensions (L x W x H)	580 x 200 x 220mm (22.8″ x 7.9″ x 8.7″)
Winch Weight (Version 3)	19.7kg (with synthetic rope attached)
Total Kit Weight	26.65kg (including rope, control box, cables, bolts & fairlead)

Carbon Scout Pro – 7000lb Winch

admin — Wed, 02 Sep 2026 19:53:40 +0000

The Carbon Offroad Scout Pro 7K is a powerhouse engineered to be the fastest winch for light vehicles.

With a formidable 3175.1kg (7000lbs) pulling capacity, the Carbon CW-XD7 combines a 7.0HP series-wound motor, oversized modulus gearsets, and a heavy-duty solenoid to deliver relentless pulling power run after run.

Performance Series Overview

The Scout Pro 7K delivers the strength, durability, and confidence you need to conquer serious recoveries and keep the adventure moving.

Carbon Offroad Scout Pro Extreme Duty Performance Series winches are built with the frequent use winching user in mind who is tackling harsh offroad conditions on a regular basis, or the owner of vehicles which are extremely heavy, kitted out or towing in offroad conditions.

Fitment Information

The Scout Pro series winches share the same 2023 Version 3 Winch Chassis as our tried and tested 12K winch. This configuration is suited for fast winching applications on off-road buggies, lightweight crawlers, and smaller wagons. Typical applications include lighter vehicles such as Jeep platforms, including Jeep XJ-style wagons. Due to the longer 7.0HP motor, you should consult the technical drawing to determine clearance and fitment length on your winch mount. Fitment suitability should be confirmed prior to installation. The responsibility of fitment remains with the end-user or installer. Note: Check dimensions and clearance carefully before installation.

Recommended for vehicles such as off-road buggies, lightweight crawlers, and smaller wagons including lighter Jeep models and similar light vehicles.

Technical Notes

Did you Know: “Module” is the unit of size that indicates how big or small a gear is. It is the ratio of the reference diameter of the gear divided by the number of teeth.

You can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches.

Features

Motor: 7.0HP High-Torque Motor
Gearbox: 80:1 Heavy Duty Performance Gearbox
Rope: 10mm x 24m (0.4″ x 78.7ft) UHMWPE Synthetic Rope (Pre-stretched)
Breaking Strain: Rated at 9000kg (19841.6lbs) minimum
Chassis: Carbon Offroad 2023 V3 Winch Chassis (shared with proven 12K winch)
Optional Upgrade: Compatible with Carbon Offroad Air Freespool Clutch Upgrade

1 x Carbon Scout Pro 3175.1kg (7000lbs) Winch
1 x 24m (78.7ft) of 10mm (0.4″) high density pre stretched premium UHMWPE rope
1 x Forged rope thimble
1 x Black MegaPro hook
1 x MegaPro billet fairlead
1 x Wired remote
1 x Wireless remote

Feature	Specification Metric (Imperial)
Rated Line Pull	3175.1kg (7000lbs)
Motor	7.0HP
Gear Ratio	80:1
Rope Dimensions	10mm x 24m (0.4″ x 78.7ft)
Minimum Breaking Strain	9000kg (19841.6lbs)

Carbon Scout Pro – 20000lb Extreme Duty Truck Winch

admin — Wed, 02 Sep 2026 19:53:40 +0000

Extreme Duty Recovery Power

The Carbon Offroad Extreme Duty Scout Pro 20K Truck Winch is engineered to deliver reliable performance in demanding off-road and recovery environments, featuring a massive 7HP series-wound motor and an ultra-low 354:1 three-stage planetary gearbox.

Overview

The Carbon Offroad Scout 20K is a high-capacity recovery powerhouse. With a rated pulling capacity of 9072kg (20000lbs), the CW-XD20 is specifically suited to hauling heavy trailers, recovering large commercial vehicles, and operating in extreme terrain where consistent, unstoppable pulling power is required.

For ultimate convenience, you can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for seamless integration with the Scout Pro series.

Features

Colossal Pulling Capacity: Delivers a massive 9072kg (20000lbs) single-line pull for heavy-duty trucks and industrial recovery.
Proportional Braking: The automatic brake system integrated within the motor frame applies force based on the load, significantly reducing heat buildup on the drum.
MegaPro Premium Components: Includes the multi-position CNC billet type 3 hard anodised fairlead for maximum protection of your high-capacity synthetic rope.
Rotating Ring Gear Clutch: Provides easy switching between freespool and engaged modes for rapid deployment.
Weatherproof Electronics: Features a 600A sealed solenoid and an IP68 rating for protection against water ingress and dust.
Unmatched Warranty: Backed by a Lifetime Mechanical Warranty and 5-Year Electrical and Water Ingress Protection.

1 x Carbon Offroad Scout Pro 20K Truck Winch
1 x Synthetic Rope (25m x 13mm / 82ft x 0.5″)
1 x MEGAPRO CNC Billet Fairlead
1 x 600A Sealed Solenoid & Control Box
1 x Wired Remote Control (3.6m / 11.8ft lead)
1 x Wireless Remote Control
1 x Mounting Hardware Kit

Feature	Specification Metric (Imperial)
Part Number	CW-XD20
Rated Line Pull	9072kg (20000lbs) single-line
Motor	12V DC 7HP Series Wound
Gear Ratio	354:1 3-Stage Planetary
Synthetic Rope	25m x 13mm (82ft x 0.5″)
Drum Dimensions (D x L)	88mm x 224mm (3.5″ x 8.8″)
Mounting Bolt Pattern	254mm x 114.3mm (10″ x 4.5″)
Winch Dimensions (L x W x H)	579mm x 192mm x 224mm (22.8″ x 7.6″ x 8.8″)
Recommended Battery	650 CCA minimum
Installed Weight	31.7kg (69.9lbs)
Total Kit Weight	37.2kg (82.0lbs)

12V DC Performance Specs

Line Pull lbs (kgs)	Line Speed ft/min (m/min)	Motor Current (Amps)	Rated Line Pull Position lbs (kgs)
0	26.2 (8.0)	70	1 / 20000 (9072)
4000 (1814)	10.8 (3.3)	145	2 / 16140 (7321)
8000 (3629)	8.5 (2.6)	230	3 / 13520 (6133)
12000 (5443)	6.2 (1.9)	310	4 / 11660 (5289)
16000 (7257)	4.6 (1.4)	390	–
20000 (9072)	3.3 (1.0)	460	–

Ford 150 – Ultimate Ride

Front Runner Series Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit

Runva 13 Expedition winch 12V, 13,000lbs

Product Description

Runva 13XP-12VD Premium Winch

Product Description

Ideal for most heavy duty 4X4 applications, this model features the newly designed gearbox with integrated ratchet braking system. The ENTIRE winch is IP67 rated. Another fantastic model crafted by Runva.

Carbon Winch Accessory Kit 12V

Versatile Control & Hardware

Why Choose This Kit?

Contents

Carbon Winch Accessory Kit 24V

Fast Facts

Winch Accessory Kit Features

Contents

3 reviews Carbon Offroad Air Freespool Clutch Upgrade for 12K & Scout Pro Winches

Carbon Scout Pro 15000lb V3 24V

Extreme Duty Recovery Power

Engineered for Heavy Rigs

Features

Contents

Carbon 12K – 12000lb Winch V3X with MegaPro Hook – 24V

Lightweight High-Performance 24V Winch

Overview

Features

Contents

Carbon Scout Pro – 7000lb Winch

Performance Series Overview

Fitment Information

Technical Notes

Features

Contents

Carbon Scout Pro – 20000lb Extreme Duty Truck Winch

Extreme Duty Recovery Power

Overview

Features

Contents

12V DC Performance Specs