5inch stainless snorkel for the Toyota Landcruiser Facelift 70 Series (208/2023-onwards). 

Please advise if the car has a sun visor.

Please choose your items carefully as we do not offer refunds for change of mind: Refund Policy

Noise Level (Please be sure to research the noise level prior to purchasing): https://cdn.shopify.com/videos/c/o/v/8dbcabf016b34180b9bb78632ed68db9.mov

Designed and fabricated by the team at Fabulous Fabrications. Each snorkel is hand crafted in house, made from the finest 316 stainless steel and purge welded to guarantee longevity and a superior quality finish. 

Each snorkel comes with a 3mm laser cut endcap, all required fixtures and fittings and a comprehensive fitting guide to ensure a trouble free installation. 

Please note: our templates are hand drawn for accuracy and copied on paper or light card. The reason for this, is that we have found that paper/light card is easily manipulated and therefore has been the best option for us being able to accurately modify our templates to suit each vehicle.

RECOMMENDED FITTING TIME: 2.5 HOURS

Suit 2016+ DPF Modles only

• 63mm (50nb) Medium pipe
• 65×35 RHS slider section
• 5mm U-bolts that wrap the chassis with 2x10mm bolts
• Front mount is 5mm plate sandwiched between the cross member and chassis for greater strength
• Dimple die ally step tread with rhino linning for anti slip

For vehicles fitted with a Superior Engineering Coil Conversion, please let us know in the order notes!

Suit 2016+ DPF Modles only

• 63mm (50nb) Medium pipe
• 65×35 RHS slider section
• 5mm U-bolts that wrap the chassis with 2x10mm bolts
• Front mount is 5mm plate sandwiched between the cross member and chassis for greater strength
• Dimple die ally step tread with rhino linning for anti slip

For vehicles fitted with a Superior Engineering Coil Conversion, please let us know in the order notes!

Model: 78 / 79 Series – FZJ79/78 – HZJ79/78 – HDJ79 – VDJ79/78 – GRJ79

Year: 09/1999 to 07/2016 Single Cab – 09/1999 on Troop Carrier Dual Cab

Suspension Type: Coil Spring Front / Leaf Spring Rear

Front Lift: 75mm

Rear Lift: 50-75mm

Detail: Pickup
4.5L Turbo Diesel Dual Cab/Pickup
Troop Carrier
IFP/IMS monotube shock absorbers
Does not suit 08/2016 on, Single Cab Models.
2022 on Models Equipped With AEB Require Calibration By A Toyota Dealer After Installation

The kit contains:

2x Dobinsons Front Coil Springs
2x IMS51-60116 – IFP Monotube Front Shock absorbers
2x IMS45-60913 – IFP Monotube Rear Shock absorbers
4x U Bolts
1x PB59-1100K – Polyurethane Leaf Spring Bush Kit
1x BA59-001 – Brake Adjuster
2x Dobinsons Rear Leaf Springs
Recommended Upgrades:

2x SK59-051 – Greasable Shackles & 2x SP59-057 – Greasable Shackle Pins
1x Castor kit:
– RB59-548K – Castor Kit – Fixed Rubber Front Radius Arm Castor Kit – Angle Setting: ±2°
– WA59-585K – Castor Plate Kit – 4° Castor Plate Kit – Suits 3″-5″ Lift
1x WA59-544K – ABS Cable Bracket Kit
* Must Be Fitted To Vehicles With ABS Brakes
1x WA59-543K – Adjustable Sway Bar Extension (Suits 2″ to 4″ Lift)
* Must Be Fitted For Tail-Shaft/Swaybar Clearance
1x PR59-1418 – Adjustable Panhard Rod – Right Hand Drive V8 Dual Cab & Single Cab to 07-08/16
* Approx 940mm Long Centre of Bush to Centre of Bush (Complete with Bushes)
1x PR59-1420 – Adjustable Panhard Rod – Right Hand Drive 6 Cyl & Single Cab V8 09/16 on
* Approx 810mm Long Centre of Bush to Centre of Bush (Complete with Bushes)
Optional Upgrades:

1x Steering Damper – FZJ79,HZJ79 (to 04/2007):
– SD59-824 – Steering Damper – FZJ79,HZJ79 (to 04/2007)
– SS59A824 – Adjustable Performance Remote Reservoir Damper – FZJ79,HZJ79 (to 04/2007)
1x Steering Damper – FZJ79,HZJ79,VDJ79 (04/2007 on):
– SD59-825 – Steering Damper – FZJ79,HZJ79,VDJ79 (04/2007 on)
– SS59A825 – Adjustable Performance Remote Reservoir Damper – FZJ79,HZJ79,VDJ79 (04/2007 on)
1x RM59-041 – Reservoir Mounting Bracket Kit (MRR and MRA kits only)
* Optimal Remote Reservoir Fitment,Positioning & Strength
* Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength

This bar comes standard in black powder coat.

Everyone has a boring old ARB or TJM bar. Yeah I know, yawn, seen it all before. How about you stand out from the crowd and get something that shows your wild and fun side.

Benefits.

Looks. Yep this bad boy looks great and will give your Land Cruiser that Super aggressive look
Smaller bar means it weighs less so your Cruiser can still be fast
Better Airflow than the rest to keep your motor cool too.
Easy fitment of bar and winch
Winch can be fitted after bar is fitted so, yeah, nice
Winch mounts feet down, (actually how most winches were designed,)
Can have LED light bar fit inside bar for super stealth cool look (20″ to 22″ LED single row)
Optional light bar area cover plate if you don’t want to have light bar set into bull bar (at additional cost)
Can run dual cube lights in wings or single row 7-8″ light bars.
Works with vehicles equipped with Autonomous Emergency Braking and Radar cruise
Features

ADR compliant
Airbag compatible
Bumper replacement,
Welded top hoop section for maximum strength.
Welded one piece bar with welded wing supports for super toughness
Only sits 150-160mm out from front of grill. Compare that to our standard 3 letter competitors
Zinc plated then powder coated Matte black
Suits most low mount winches including Warn Zeon. Rated for 12,000lbs winch
Easily mount 2 x 2 inch cube lights (per wing) or up to an 8″ LED light in each wing.
Number plate flip included for those running a winch
Can be colour coded to vehicle
Rated Steel Recovery points included as standard as part of the mounts. (Each tow point is rated to 4500kg)

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22″ LED light bar) If you don’t want to run this light we supply a cover plate.

Included in box

1 x Front bar weldment
1 x LH chassis impact bracket
1 x RH chassis impact bracket
1 x mesh fairlead mount
1 x Mesh infill LH
1 x Mesh infill RH
1 x Light cover Mesh LH
1 x Light cover Mesh RH
1 x centre bash plate
1 x Trim plate front (for those not running LED light bar inside bar
2 x Chassis bracket gusset
2 x Chassis recovery points
2 x Antenna brackets for top of tube
1 x winch control box bracket
1 x number plate flip
A butt load of nuts and bolts to make it all sit nice and pretty

Suits all Dual cabs 2007-2023 and single cabs 2007-2017 including ones with radar cruise and AEB

This bar does not suit single cab Utes 2017-2023, if you want our bar for the single cab click here

Install time: 2 hours

Install difficulty: 3/10

*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.

** Installation pricing is based on standard OEM

vehicles using generic wiring harnesses and switches. Any additional

requirements—including factory switch integration, custom wiring, or

non-standard accessories—may incur additional charges payable directly to the

fitting partner at the time of installation. Non-standard or additional items

(such as UHF units or other branded lighting and accessories) can also be

sourced and supplied directly through the fitting partner if required.

Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final

freight cost, this will be reviewed and adjusted accordingly.

Note: Some images depict prototype products. The actual final product may vary in appearance.

Colour-coded bars are not an exact paint match; the

finish will be a close approximation only. Please provide your VIN so we can

confirm the correct colour code. Note that selecting colour coding typically

adds an additional 4–6 weeks to the lead time.

Features

• ADR compliant
• Airbag compatible 
• Suits 2023 model with Radar cruise and AEB
• Bumper replacement,
• Optional top hoop- Stealth hoop which takes up to a 22″ LED light bar single row, or 2″ round tube (Does not Suit MY23+ with emergency braking)
• Welded one piece bar with welded wing supports for super toughness
• Only sits 150-160mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Suits most low mount winches including Warn Zeon. Rated for 12,000lbs winch
• Easily mount 2 x 2 inch cube lights (per wing) or up to an 8 Inch led light in each wing.   
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• Rated Steel Recovery points included as standard as part of the mounts. (Each tow point is rated to 4500kg)

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22″ LED light bar) If you don’t want to run this light we supply a cover plate.

Stealth top hoop has same arrangement for led light bar, fitting most single row light bars, but we suggest the Offroad Animal 22″ LED light bar

Here is a comparison of the 3 bolt on hoop options.  If your vehicle has Radar cruise you can not run any top hoops

Included in box

• 1 x Front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x Mesh infill LH
• 1 x Mesh infill RH
• 1 x Light cover Mesh LH
• 1 x Light cover Mesh RH
• 1 x centre bash plate
• 1 x Trim plate front (for those not running LED light bar inside bar
• 2 x Chassis bracket gusset 
• 2 x Chassis recovery points
• 1 x winch control box bracket
• 1 x number plate flip
• A butt load of nuts and bolts to make it all sit nice and pretty

  This bar does not suit  single cab Utes 2017-2023, click here for our Single cab 2017-2023 version 

Suits all Dual cabs 2007-2023 and single cabs 2007-2017 including ones with radar cruise and AEB

Optional Stealth and Round Top hoop do not work with MY23+ Automatic emergency Braking

Install time: 4 hours

Install difficulty: 3/10

*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.

** Installation pricing is based on standard OEM 

vehicles using generic wiring harnesses and switches. Any additional

requirements—including factory switch integration, custom wiring, or

non-standard accessories—may incur additional charges payable directly to the

fitting partner at the time of installation. Non-standard or additional items

(such as UHF units or other branded lighting and accessories) can also be

sourced and supplied directly through the fitting partner if required.

Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final

freight cost, this will be reviewed and adjusted accordingly.

Note: Some images depict prototype products. The actual final product may vary in appearance.

Colour-coded bars are not an exact paint match; the

finish will be a close approximation only. Please provide your VIN so we can

confirm the correct colour code. Note that selecting colour coding typically

adds an additional 4–6 weeks to the lead time.

If $9999 appears in the freight charge, please check address information is entered correctly as per Australia post.