4inch stainless snorkel for the Mitsubishi MR Triton.

Please choose your items carefully as we do not offer refunds for change of mind: Refund Policy

Designed and fabricated by the team at Fabulous Fabrications. Each snorkel is hand crafted in house, made from the finest 316 stainless steel and purge welded to guarantee longevity and a superior quality finish. 

Each snorkel comes with a 3mm laser cut endcap, all required fixtures and fittings, custom aluminium billet adaptor to easily connect to the stock airbox and a comprehensive fitting guide to ensure a trouble free installation. 
 

Please note: our templates are hand drawn for accuracy and copied on paper or light card. The reason for this, is that we have found that paper/light card is easily manipulated and therefore has been the best option for us being able to accurately modify our templates to suit each vehicle. 

RECOMMENDED FITTING TIME: 2.5 HOURS

Features

• Modular individual design.
• Lightweight alloy construction with corrosion resistance.
• Premium matte powder-coated finish.
• Curved extension provides mounting options for lightweight accessories.
• Designed to integrate with compatible HSP Roll R Covers and, where specified, direct-to-tub mounting.
• DIY-friendly installation with professional fitting available.

Warranty

2-year warranty.

• Cut-proof aluminium slats with vinyl-bonded top
• Quick-release curtain
• Slim profile side rails
• Heat-resistant pads
• Tie-down straps
• Manual operation
• Weather-resistant design
• 2-year warranty

• Cut-proof aluminium slats with vinyl-bonded top
• Quick-release curtain
• Slim profile side rails
• Heat-resistant pads
• Tie-down straps
• Manual operation
• Weather-resistant design
• 2-year warranty

• 2 YEAR WARRANTY
• CUSTOM FLAT RAIL DESIGN WITH INTEGRATED ACCESSORY CHANNEL
• Factory Sports bar compatible
• OEM Design & Quality – trusted by Australian dealerships Australia wide!
• Stainless Steel roller housing, fittings, brackets – impervious to corrosion
• Interlocking slats prevent “stanley knife” attack as seen on cheap alternatives
• Installation using factory approved clamping brackets
• Dynamometer tested motor with 7+ years / 100,000 cycles life expectancy
• IPX6 rating – resistant to high pressure sprays of water
• No spring design for life long reliability
• Remote Control – open/close/pause/light on/off (two remotes)
• Safety stop with anti-pinch feature 
• Glidetronic for smooth operation
• Full size smart LED Light with auto off function to save your battery
• Matte Black Powder Coated Aluminium coating for extra durability

Our Roller Covers / Shutters are the combination of hours of R&D in Australia.

We have improved and listened to our customers and believe this is Australia’s most durable electric roller cover on the market!

These Roller Covers are designed for Australian conditions, with stainless steel internals, fittings, brackets and a durable design that will not fade or deteriorate in our harsh conditions.

The motors on our roller covers have undergone rigorous stress tests including dynamometer testing to ensure they operate perfectly for years on end.

These roller covers feature interlocking slats that are NOT susceptible to the “Stanley knife cut” attack a seen on other branded Roller Covers on Youtube!

With a redesigned four point drainage system these Roller Covers will keep your tub dry even in the harshest of downpours! Yes they are extremely water resistant!

What about your factory Sports Bars?
Our ROLLER COVERS are designed with your factory Sports Bars in mind, we supply FREE adaptor brackets with our roller covers so your factory Sports Bar can be refitted without extra cost!

• 2x Dobinsons Front Coil Springs
• 2x MR43-50800 – Monotube Remote Reservoir nonadjustable Front Shock absorbers
  Adjustable Spring Seat Height X = 215mm / 8.45″
• 2x MR43-50801 – Monotube Remote Reservoir nonadjustable Rear Shock absorbers
• 1x PB43-1109K – Polyurethane Bush Kit
• 4x U-bolts:
  UB59-453-2 – to suit L43-162-R and L43-163-R
  UB59-437 – to suit L43-164-R and L43-165-R
• 2x Dobinsons Rear Leaf Springs

• Coil and Strut Assembly with new strut tops SC43-005 – Strut tops
• 2x SK43-063 – Greasable Shackles & 2x SP59-060 – Greasable Shackle Pins
• 1x WA43-539K – Top Out Stop Kit

Ideal for vehicles with no constant load.
Rear spring is specifically designed for heavy-duty use on vehicles that have no constant load. (Matching springs with weight is critical to performance. Talk to us to ensure this kit is right for you before purchasing.)

• Looks.  Yep this bad boy looks great and will give your Triton that Super aggressive look
• Smaller bar means it weighs less than others
• Better Airflow than the rest to keep your motor cool too.
• Bash plates included as standard
• Easy fitment of bar and winch
• Winch can be fitted after bar is fitted so, yeah, nice
• Winch mounts feet down, (actually how most winches were designed,)
• Can have LED light bar fit inside bar for super stealth cool look (up to 32″ LED single row)  
• Can have LED light bar fitted into optional top stealth hoop. (optional hoop fits 22″ LED single row light_
• Suitable for all Parking sensors, Radar, AEB, cross Traffic Sensors and all tech fitted to vehicle

Features:

• ADR compliant
• Airbag compatible 
• Optional top hoop- Stealth hoop which takes up to a 22″ LED light bar single row
• Welded one piece bar with welded wing supports for super toughness
• Only sits 135mm out from front of badge. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Hi lift jacking points included in the designh
• Suits most low mount winches including Warn Zeon
• Works with factory fog lights 
• Works with factory Parking Sensors
• Can be colour coded to vehicle
• Standard 20mm steel recovery points included as part of mounts
• Bar fully made from steel.  3mm wings and body, 5mm mounts and winch cradle. 
• Nothing extra required to run a winch
• Bash plates included in the price
• 360 front camera relocates into bull bar
• Suits many Offroad Animal bolt on hoops including Rally hoops to suit Stedi Lights
• 31.5kg removed and 69kg added, so a net gain of 37.5kg