4inch stainless snorkel and alloy airbox kit for the Nissan Navara NP300/D23 (03/2015 – 2025). 

Available in Short Entry or Mid Entry. 

Please choose your items carefully as we do not offer refunds for change of mind: Refund Policy

Noise Level (Please be sure to research the noise level prior to purchasing): https://cdn.shopify.com/videos/c/o/v/fd44adc85d6b44088c9ceff1cde365ed.mov

Please Note: RX Navaras we will be unable to post the MID Entry option due to having a different guard shape to the other models, we do however offer the short entry option for the RX. 

Designed and fabricated by the team at Fabulous Fabrications. Each snorkel is hand crafted in house, made from the finest 316 stainless steel and purge welded to guarantee longevity and a superior quality finish. Each snorkel comes with a 3mm laser cut endcap. 

Each airbox is made from the finest 3mm aluminium, laser cut and folded for precision accuracy and fully tig welded to guarantee longevity and a superior quality finish. 

Each airbox comes powdercoated Dulux Mannex Black, with an Australian made Unifilter air filter designed specifically for our airbox’s which are fully serviceable, 4.5mm nitrile gasket, 3mm alloy pressure plate and 6mm perspex lid with laser engraved Fabulous Fabrications logo, to ensure a long lasting seal and universal washer kit from Flexible Drive. They also feature a CNC machined, one piece billet aluminium weld in MAF housing designed to factory specifications to ensure there will be no issues with your vehicle throwing codes. 

Please note: we do not connect to the factory airbox on an np300 as the airbox itself does not provide an adequate seal on the factory air filter.

When driving in the rain, water hits the leading edge of the snorkel, and then the wind pushes the water up the snorkel. When it gets to the top, because the engine air speed is greater than speed in which you’re travelling the engine will suck the water back down the snorkel. We have seen stainless snorkels connected to the factory airbox wet the filter, which causes it to distort/disform, sucking in and no longer sealing as it should. It then dries in that position, in turn letting dust and dirt past the filter and can cause turbo and engine issues.

In a np300 we also have to remove the factory washer bottle, and turn the ecu 90 degrees to allow the piping for the snorkel to run through the inner guard, both of which bolt to the front and back of our supplied airbox

All required fixtures and fittings, and a comprehensive fitting guide are supplied to ensure trouble free installation of the airbox. 

DISCLAIMERS

Please note: our templates are hand drawn for accuracy and copied on paper or light card. The reason for this, is that we have found that paper/light card is easily manipulated and therefore has been the best option for us being able to accurately modify our templates to suit each vehicle.

RECOMMENDED FITTING TIME: 5 HOURS

4inch stainless snorkel and alloy airbox kit for the Nissan Navara NP300/D23 (03/2015 – 2025). 

Available in Short Entry or Mid Entry. 

Please choose your items carefully as we do not offer refunds for change of mind: Refund Policy

Noise Level (Please be sure to research the noise level prior to purchasing): https://cdn.shopify.com/videos/c/o/v/fd44adc85d6b44088c9ceff1cde365ed.mov

Please Note: RX Navaras we will be unable to post the MID Entry option due to having a different guard shape to the other models, we do however offer the short entry option for the RX. 

Designed and fabricated by the team at Fabulous Fabrications. Each snorkel is hand crafted in house, made from the finest 316 stainless steel and purge welded to guarantee longevity and a superior quality finish. Each snorkel comes with a 3mm laser cut endcap. 

Each airbox is made from the finest 3mm aluminium, laser cut and folded for precision accuracy and fully tig welded to guarantee longevity and a superior quality finish. 

Each airbox comes powdercoated Dulux Mannex Black, with an Australian made Unifilter air filter designed specifically for our airbox’s which are fully serviceable, 4.5mm nitrile gasket, 3mm alloy pressure plate and 6mm perspex lid with laser engraved Fabulous Fabrications logo, to ensure a long lasting seal and universal washer kit from Flexible Drive. They also feature a CNC machined, one piece billet aluminium weld in MAF housing designed to factory specifications to ensure there will be no issues with your vehicle throwing codes. 

Please note: we do not connect to the factory airbox on an np300 as the airbox itself does not provide an adequate seal on the factory air filter.

When driving in the rain, water hits the leading edge of the snorkel, and then the wind pushes the water up the snorkel. When it gets to the top, because the engine air speed is greater than speed in which you’re travelling the engine will suck the water back down the snorkel. We have seen stainless snorkels connected to the factory airbox wet the filter, which causes it to distort/disform, sucking in and no longer sealing as it should. It then dries in that position, in turn letting dust and dirt past the filter and can cause turbo and engine issues.

In a np300 we also have to remove the factory washer bottle, and turn the ecu 90 degrees to allow the piping for the snorkel to run through the inner guard, both of which bolt to the front and back of our supplied airbox

All required fixtures and fittings, and a comprehensive fitting guide are supplied to ensure trouble free installation of the airbox. 

DISCLAIMERS

Please note: our templates are hand drawn for accuracy and copied on paper or light card. The reason for this, is that we have found that paper/light card is easily manipulated and therefore has been the best option for us being able to accurately modify our templates to suit each vehicle.

RECOMMENDED FITTING TIME: 5 HOURS

The GT Bull Bar not only seamlessly integrates with the facelifted D23 model, but it also offers a seamless retrofit option for 2015 – 2020 NP300 Navara variants.

The GT Bull Bar significantly enhances your Navara’s off-road capabilities. Boasting full ADR Approval, the GT bull bar increases the Navara’s approach angles, an integrated winch cradle, Rated recovery points, robust 55mm steel tubes, built in LED Fog lights, & underbody protection.

• 2 YEAR WARRANTY
• OEM Design & Quality – trusted by Australian dealerships Australia wide!
• Stainless Steel roller housing, fittings, brackets – impervious to corrosion
• Inter-locking slats prevent “stanley knife” attack as seen on cheap alternatives
• Installation with clamp-on system, DIY on the weekend!
• Dynamometer tested motor with 7+ years / 100,000 cycles life expectancy
• IPX6 rating – resistant to high pressure sprays of water
• No spring design for life long reliability
• Remote Control – open/close/pause/light on/off (two remotes, one spare)
• Safety stop with anti-pinch feature
• Glidetronic operation for whisper quiet and smooth operation
• Full size smart LED Light with auto off function to save your battery
• Matte Black Anodised Aluminium coating for extra durability
• Matches the look and styling of the factory roller cover

Our 2022 Roller Covers / Shutters are the combination of hours of R & D in Australia, testing and hands on experience with our manual covers!

We have improved and listened to our customers and believe this is Australia’s most durable electric roller cover on the market!

These Roller Covers are designed for Australian conditions, with stainless steel internals, fittings, brackets and a durable design that will not fade or deteriorate in our harsh conditions.

The motors on our roller covers have undergone rigorous stress tests including dynamometer testing to ensure they operate perfectly for years on end.

These roller covers feature inter-locking slats that are NOT susceptible to the “Stanley knife cut” attack a seen on other branded Roller Covers on Youtube!

With a redesigned four point drainage system these Roller Covers will keep your tub dry even in the harshest of downpours! Yes they are extremely water resistant!

What about your factory Sports Bars?
Our ROLLER COVERS are designed with your factory Sports Bars in mind, we supply FREE adaptor brackets with our roller covers so your factory Sports Bar can be refitted without extra cost!

• Looks.  Yep this bad boy looks great and will give your Navara that Super aggressive look
• Smaller bar means it weighs less so your Navara can still be fast
• Works with safety and driving tech like Autonomous Emergency Braking
• Better Airflow than the rest to keep your motor cool too.
• Easy fitment of bar and winch
• Winch can be fitted after bar is fitted so,  yeah, nice
• Winch mounts feet down, (actually how most winches were designed,)
• Can have LED light bar fit inside bar for super stealth cool look (up to 22″ LED single row)  
• Cover plate included if you don’t want to have light bar set into bull bar
• Can have LED light bar fitted into optional top stealth hoop. 

 Features

• ADR compliant
• Airbag compatible 
• Bumper replacement, with no cutting of bumper. 
• Optional top hoop- Stealth hoop which takes up to a 22″ LED light bar single row
• Welded one piece bar with welded wing supports for super toughness
• Works with safety and driving aids like Autonomous Emergency Braking
• Only sits 150-160mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Hi lift jacking points included
• Suits most low mount winches including Warn Zeon
• Works with factory fog lights or easily mount 2 Cube lights (per wing) or up to an 8″ LED light bar in each wing. 
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• 20mm steel tow hooks included on mounts
• Steel bash plates included as standard

• Looks.  Yep this bad boy looks great and will give your Navara that Super aggressive look
• Smaller bar means it weighs less so your Navara can still be fast
• Works with safety and driving tech like autonomous emergency braking
• Better Airflow than the rest to keep your motor cool too.
• Easy fitment of bar and winch
• Winch can be fitted after bar is fitted so,  yeah, nice
• Winch mounts feet down, (actually how most winches were designed,)
• Can have LED light bar fit inside bar for super stealth cool look (up to 22″ LED single row)  

Features

• ADR compliant
• Airbag compatible 
• Bumper replacement, with no cutting of bumper. 
• Welded one piece bar with welded wing supports for super toughness
• Works with safety and driving aids like Autonomous emergency braking
• Only sits 150-160mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Hi lift jacking points included as part of design
• Suits most low mount winches including Warn Zeon
• Works with factory fog lights or easily mount 2 Cube lights (per wing) or up to an 8″ LED light bar(single row) in each wing. 
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• 20mm steel tow hooks included on mounts
• Steel bash plates included as standard

• Compatible with radar module
• Rated recovery points included
• Light bar slot integrated
• Australia Design
• Sleek and integrated to the vehicle
• Full bumper bar replacement
• Constructed from 3 mm high grade steel plate
• ADR / Airbag compliant
• Winch compatible up to 12,000 lb except Warn winch
• European E-Mark certified high-quality LED lighting system (Day time running lights, Fog lamps, and Indicators)
• Comes with 3 pieces splash guard
• Mounting points for additional lights and aerial
• Number plate flip included for those running a Winch
• Matte Black powder coated finish
• Winch lever access

*** Bash plate and shackles sold separately ***

• Compatible with radar module
• Rated recovery points included
• Light bar slot integrated
• Australia Design
• Sleek and integrated to the vehicle
• Full bumper bar replacement
• Constructed from 3 mm high grade steel plate
• ADR / Airbag compliant
• Winch compatible up to 12,000 lb except Warn winch
• European E-Mark certified high-quality LED lighting system (Day time running lights, Fog lamps, and Indicators)
• Comes with 3 pieces splash guard
• Mounting points for additional lights and aerial
• Number plate flip included for those running a Winch
• Matte Black powder coated finish
• Winch lever access

*** Bash plate and shackles sold separately *

• Compatible with original factory parking sensors
• Tow 3.5 tonnes
• Accommodate 12 pin trailer socket
• LED work lights
• Constructed from 3 mm high grade steel plate
• Matte Black power coated finish

*** Recovery points are not available ***
***Not compatible with (275/70r17) spare Tyre on the Warrior Pro-4X Navara ***